Rotary attachment
Turns round objects under the laser so you can engrave tumblers, bottles, glasses and rings.
xTool · Open frame
xTool D1 Pro
xTool D1 Pro (10W / 20W / 40W, 430 × 390 mm open frame) — what it cuts, what it engraves, which accessories fit and our tested settings.
- Optical power
- 10W / 20W / 40W
- Work area
- 430 × 390 mm
- Software
- xTool Creative Space, LightBurn
- Laser class
- Class 4
- Air assist
- optional
- Camera
- No
Check Price on Amazon →
Price and stock are live on the retailer's page. We may earn a commission.
Settings
xTool D1 Pro settings by material
Keyed to the module power you own. Pick the material for a full page with focus notes and test-grid advice.
- Baltic birch plywood →
- MDF →
- Acrylic (opaque/black) →
- Slate coasters →
- Veg-tan leather →
- Powder-coated stainless tumbler →
- Anodized aluminum blanks →
- Cork sheets/coasters →
Starting points, not gospel. Rows marked “starting point” come from manufacturer tables and community results. Run a small power/speed test grid on your own sheet before a real job — batch, humidity and focus all shift the result.
| Module | Job | Thickness | Power | Speed | Passes | LPI | Air | Status |
|---|---|---|---|---|---|---|---|---|
| 10W | Engrave | 3 mm | 40% | 3000 mm/min | 1 | 150 | Off | Starting point |
| 10W | CutFocus on the surface; air assist on | 3 mm | 100% | 250 mm/min | 2 | — | On | Starting point |
| 10W | Engrave | 3 mm | 35% | 3000 mm/min | 1 | 150 | — | Starting point |
| 10W | Cut | 3 mm | 100% | 150 mm/min | 3 | — | On | Starting point |
| 10W | EngraveOpaque/black acrylic only — clear acrylic passes 455nm light | 3 mm | 30% | 3000 mm/min | 1 | — | — | Starting point |
| 10W | Cut | 3 mm | 100% | 150 mm/min | 4 | — | On | Starting point |
| 10W | EngraveWipe with a damp cloth; result is a light grey mark | — | 60% | 3000 mm/min | 1 | 200 | — | Starting point |
| 10W | EngraveVeg-tan only; chrome-tan fumes are toxic | — | 25% | 4000 mm/min | 1 | 150 | — | Starting point |
| 10W | EngravePowder-coated tumbler on rotary; strips coating to bare steel | — | 90% | 1500 mm/min | 1 | 250 | — | Starting point |
| 10W | Mark | — | 70% | 3000 mm/min | 1 | 250 | — | Starting point |
| 10W | EngraveCork chars fast — start low | — | 20% | 4000 mm/min | 1 | 120 | — | Starting point |
| 20W | Cut | 3 mm | 100% | 500 mm/min | 1 | — | On | Starting point |
| 20W | Cut | 6 mm | 100% | 120 mm/min | 2 | — | On | Starting point |
| 20W | Cut | 6 mm | 100% | 80 mm/min | 3 | — | On | Starting point |
| 20W | Cut | 3 mm | 100% | 300 mm/min | 2 | — | On | Starting point |
Fits this machine
Accessories for the xTool D1 Pro
Air assist pump + nozzle
Blows a steady stream of air at the laser spot for cleaner cuts, less charring and a cleaner lens.
Honeycomb working bed
A metal honeycomb panel that lifts your material so cuts pass through cleanly without scorching the back.
Laser enclosure
A fire-resistant box around an open-frame laser that contains smoke and blocks stray light.
Riser / extension kit
Raises the laser or extends its frame so tall items, thick boards and rotaries fit underneath.
Laser safety glasses (OD6+ 450nm)
Goggles that block the blue diode wavelength. Required for any open-frame diode laser.
Compare
How it stacks up
Frequently asked questions
What software does the xTool D1 Pro use?
xTool Creative Space, LightBurn. LightBurn is paid; the brand software is free.
Does the xTool D1 Pro need air assist?
Not included. For cutting plywood or acrylic cleanly it is the first upgrade to buy.
Is the xTool D1 Pro safe indoors?
It is a Class 4 open-frame laser. Wear 445–455 nm goggles, never leave it unattended, and vent fumes outdoors.