Rotary attachment
Turns round objects under the laser so you can engrave tumblers, bottles, glasses and rings.
Creality · Open frame
Creality Falcon 2
Creality Falcon 2 (22W / 40W, 400 × 415 mm open frame) — what it cuts, what it engraves, which accessories fit and our tested settings.
- Optical power
- 22W / 40W
- Work area
- 400 × 415 mm
- Software
- LightBurn, Falcon Design Space
- Laser class
- Class 4
- Air assist
- included
- Camera
- No
Check Price on Amazon →
Price and stock are live on the retailer's page. We may earn a commission.
Settings
Creality Falcon 2 settings by material
Keyed to the module power you own. Pick the material for a full page with focus notes and test-grid advice.
- Baltic birch plywood →
- MDF →
- Acrylic (opaque/black) →
- Powder-coated stainless tumbler →
- Anodized aluminum blanks →
Starting points, not gospel. Rows marked “starting point” come from manufacturer tables and community results. Run a small power/speed test grid on your own sheet before a real job — batch, humidity and focus all shift the result.
| Module | Job | Thickness | Power | Speed | Passes | LPI | Air | Status |
|---|---|---|---|---|---|---|---|---|
| 22W | Engrave | 3 mm | 25% | 4000 mm/min | 1 | 150 | — | Starting point |
| 22W | Cut | 3 mm | 100% | 500 mm/min | 1 | — | On | Starting point |
| 22W | Cut | 10 mm | 100% | 80 mm/min | 3 | — | On | Starting point |
| 22W | Cut | 6 mm | 100% | 100 mm/min | 2 | — | On | Starting point |
| 22W | Cut | 3 mm | 100% | 300 mm/min | 2 | — | On | Starting point |
| 22W | Engrave | — | 70% | 2000 mm/min | 1 | 250 | — | Starting point |
| 22W | Mark | — | 50% | 3500 mm/min | 1 | 250 | — | Starting point |
Fits this machine
Accessories for the Creality Falcon 2
Honeycomb working bed
A metal honeycomb panel that lifts your material so cuts pass through cleanly without scorching the back.
Laser enclosure
A fire-resistant box around an open-frame laser that contains smoke and blocks stray light.
Laser safety glasses (OD6+ 450nm)
Goggles that block the blue diode wavelength. Required for any open-frame diode laser.
Compare
How it stacks up
Frequently asked questions
What software does the Creality Falcon 2 use?
LightBurn, Falcon Design Space. LightBurn is paid; the brand software is free.
Does the Creality Falcon 2 need air assist?
It ships with air assist. Use it for every cut.
Is the Creality Falcon 2 safe indoors?
It is a Class 4 open-frame laser. Wear 445–455 nm goggles, never leave it unattended, and vent fumes outdoors.