Air assist pump + nozzle
Blows a steady stream of air at the laser spot for cleaner cuts, less charring and a cleaner lens.
Ortur · Open frame
Ortur Laser Master 3
Ortur Laser Master 3 (10W, 400 × 400 mm open frame) — what it cuts, what it engraves, which accessories fit and our tested settings.
- Optical power
- 10W
- Work area
- 400 × 400 mm
- Software
- LightBurn, LaserGRBL
- Laser class
- Class 4
- Air assist
- —
- Camera
- No
Check Price on Amazon →
Price and stock are live on the retailer's page. We may earn a commission.
Fits this machine
Accessories for the Ortur Laser Master 3
Honeycomb working bed
A metal honeycomb panel that lifts your material so cuts pass through cleanly without scorching the back.
Rotary attachment
Turns round objects under the laser so you can engrave tumblers, bottles, glasses and rings.
Laser enclosure
A fire-resistant box around an open-frame laser that contains smoke and blocks stray light.
Frequently asked questions
What software does the Ortur Laser Master 3 use?
LightBurn, LaserGRBL. LightBurn is paid; the brand software is free.
Does the Ortur Laser Master 3 need air assist?
Not applicable for this machine type.
Is the Ortur Laser Master 3 safe indoors?
It is a Class 4 open-frame laser. Wear 445–455 nm goggles, never leave it unattended, and vent fumes outdoors.