Rotary attachment
Turns round objects under the laser so you can engrave tumblers, bottles, glasses and rings.
Creality · Enclosed
Creality Falcon2 Pro
Enclosed Class 1 Falcon with camera and air assist built in; 22, 40 or 60 W.
- Optical power
- 22W / 40W / 60W
- Work area
- 400 × 415 mm
- Software
- Falcon Design Space, LightBurn
- Laser class
- Class 1
- Air assist
- included
- Camera
- Yes
Check Price on Amazon →
Price and stock are live on the retailer's page. We may earn a commission.
Settings
Creality Falcon2 Pro settings by material
Keyed to the module power you own. Pick the material for a full page with focus notes and test-grid advice.
Starting points, not gospel. Rows marked “starting point” are either copied from the manufacturer’s published table (linked below) or are our editorial estimates from typical diode results. Neither has been bench-tested by us yet. Run a small power/speed test grid on your own sheet before a real job — batch, humidity and focus all shift the result.
| Module | Job | Thickness | Power | Speed | Passes | LPI | Air | Source | Status |
|---|---|---|---|---|---|---|---|---|---|
| 22W | EngraveWalnut/rosewood plywood row in Creality's table | 3 mm | 35% | 6000 mm/min | 1 | — | — | Manufacturer | Starting point |
| 22W | Cut | 3 mm | 100% | 450 mm/min | 1 | — | On | Manufacturer | Starting point |
| 22W | Cut | 5 mm | 100% | 350 mm/min | 1 | — | On | Manufacturer | Starting point |
| 22W | EngraveBlack opaque glossy acrylic | 3 mm | 50% | 4000 mm/min | 1 | — | — | Manufacturer | Starting point |
| 22W | CutBlack acrylic | 4.6 mm | 100% | 120 mm/min | 1 | — | On | Manufacturer | Starting point |
| 22W | Engrave | 0.65 mm | 18% | 6000 mm/min | 1 | — | — | Manufacturer | Starting point |
| 22W | Cut | 0.65 mm | 100% | 2000 mm/min | 1 | — | — | Manufacturer | Starting point |
| 22W | Mark | 3 mm | 60% | 6000 mm/min | 1 | — | — | Manufacturer | Starting point |
| 40W | EngraveWalnut/rosewood plywood row in Creality's table | 3 mm | 20% | 6000 mm/min | 1 | — | — | Manufacturer | Starting point |
| 40W | Cut | 3 mm | 100% | 750 mm/min | 1 | — | On | Manufacturer | Starting point |
| 40W | Cut | 5 mm | 100% | 600 mm/min | 1 | — | On | Manufacturer | Starting point |
| 40W | EngraveBlack opaque glossy acrylic | 3 mm | 26% | 4000 mm/min | 1 | — | — | Manufacturer | Starting point |
| 40W | CutBlack acrylic | 4.6 mm | 100% | 180 mm/min | 1 | — | On | Manufacturer | Starting point |
| 40W | Engrave | 0.65 mm | 12% | 6000 mm/min | 1 | — | — | Manufacturer | Starting point |
| 40W | Cut | 0.65 mm | 70% | 4000 mm/min | 1 | — | — | Manufacturer | Starting point |
| 40W | Mark | 3 mm | 30% | 6000 mm/min | 1 | — | — | Manufacturer | Starting point |
Manufacturer sources: Creality official Falcon2 40W table (Falcon2 Pro uses the same 22W/40W modules)
Fits this machine
Accessories for the Creality Falcon2 Pro
Fume extractor
A filtered fan unit that removes laser smoke and odours when venting outdoors isn't possible.
Compare
How it stacks up
Frequently asked questions
What software does the Creality Falcon2 Pro use?
Falcon Design Space, LightBurn. LightBurn is paid; the brand software is free.
Does the Creality Falcon2 Pro need air assist?
It ships with air assist. Use it for every cut.
Is the Creality Falcon2 Pro safe indoors?
It is an enclosed Class 1 device: safe to look at while running, but still vent fumes outdoors or through a filter.